No products in the cart.

No products in the cart.

Proskit Crimping Tool Modular CP-373

9.99

Proskit

SKU: 25556 - Out of stock Categories: ,

  • Cut, crimp, strip – 3 in 1 function
  • Suitable for 8P8C/RJ45 / 6P2C/6P4C/6P6C/RJ11/RJ12 / 4P2C/4P4C/RJ-22 crimping
  • Cutting modular cable: Place the single-bladed side of the tool's cutter facing you and cut the modular cable to the desired length. Make sure to cut the ends of the cord straight across, not diagonally
  • Stripping modular cable (Flat Cable) : Insert 4P/6P cable into the two-bladed side of the tool's stripper until it touches the stop guide / Insert 8P cable into the two-bladed side of the tool's stripper and let it extend a little past the lower cut blade
  • Squeeze handles until it stops cable must be kept perpendicular and then pull from the tool
  • Stripping Round Cable Insert the cable into the round stripping hole, turn the crimper in counter clockwise direction and cable in clockwise at the same time
  • Remove the outer jacket, insert the stripped cable into the plug and be sure the left wire at one and matches the right wire at the other end
  • Place modular plug with cable into the tool's holder. Be sure the striped wire is between the tab and gold contacts. Squeeze handles until it stops
  • 4p holder is located on the back side of the tool

Brand

PROSKIT